Facebook Pixel

Custom Printed Vinyl - PX015

As low as $2.99
SKU
459016
Reward Points You will earn 3 Reward Points for purchasing this product.
Ready To ship
Printed Vinyl
Shop the largest selection in the industry

Heat Transfer Vinyl

Our patterned heat transfer vinyl is eco solvent printed vinyl. This 2.7mm vinyl great for use on cotton, polyester, cotton/poly blends and spandex. A masking sheet will be included in the price. The masking sheet will allow you to transfer your cut design to your garment for easy pressing. Instructions for use will also be included.

Sheet size: 19.25" x 12", 12"x10" half sheet

***Special Note*** Please allow for slight color variations between pictures and actual products. Computer monitors may display color differently. If you have any concerns, please contact us before purchasing.

Instructions

How to use Printed Vinyl

We recommend doing a temperature/time test before you get started-especially if this is the first time using this item or if you are applying with an iron.

Heat press vinyl transfer instructions: Manufacturer recommended settings: 315 degrees for no more than 15 seconds.

***USE A TEFLON SHEET OVER THE TRANSFER. THE TTD EASY MASK TRANSFER TAPE WILL NOT COMPLETELY PROTECT THE VINYL FROM EXCESS HEAT. TEST ON A SCRAP FABRIC OR IN AN INCONSPICUOUS ARE FIRST TO FIGURE OUT YOUR NEEDED TIME AND IRON SETTINGS SINCE ALL IRONS AND PRESSES ARE DIFFERENT.

THE COTTON SETTING ON AN IRON IS TOO HOT. AN AVERAGE IRON COTTON SETTING IS AROUND 400 DEGREES. THE POLYESTER OR SILK SETTING IS USUALLY AROUND 300 DEGREES. IF THERE IS A DISTRESSED LOOK, FADED, SMEARING OR THE PATTERN LOOKS LIKE THE INKS ARE COMING UP, THEN THE IRON IS TOO HOT. IT IS BETTER TO START WITH A LOW TEMPERATURE AND ADD TIME THAN TEMPERATURE.THE ENCLOSED TTD EASY MASK CAN OFTEN BE USED TWICE (OR MORE). JUST RETURN IT TO THE BACKING AFTER THE FIRST USE.

DIRECTIONS FOR HEAT PRESS: CUT PATTERN/COLOR SIDE UP (LIKE AN ADHESIVE VINYL DECAL, DO NOT MIRROR/REVERSE IMAGE) AND WEED EXCESS MATERIAL. DO NOT CUT THROUGH THE BACKING. BACKING CAN BE THROWN AWAY ONCE REMOVED. YOU WILL ONLY WANT TO CUT THROUGH THE ACTUAL VINYL. APPLY TTD EASY MASK TRANSFER TAPE ON TOP OF VINYL DESIGN. SQUEEGEE VINYL REALLY WELL ON THE FRONT AND BACK TO INSURE THAT THE TTD EASY MASK IS SECURELY ATTACHED. REMOVE BACKING AND PLACE DESIGN ON GARMENT, PATTERN UP. COVER WITH TEFLON SHEET. HEAT PRESS AT 315 DEGREES WITH MEDIUM PRESSURE FOR NO MORE THAN 15 SECONDS. YOU CAN PRESS A SECOND TIME IF NEEDED AFTER YOUR DESIGN HAS COOLED. PEEL THE TTD EASY MASK OFF YOUR DESIGN WHILE IT IS STILL HOT OR WITHIN 5 SECONDS.

DIRECTIONS FOR IRON: CUT PATTERN/COLOR SIDE UP (LIKE AN ADHESIVE VINYL DECAL, DO NOT MIRROR/REVERSE IMAGE) AND WEED EXCESS MATERIAL. DO NOT CUT THROUGH THE BACKING. BACKING CAN BE THROWN AWAY ONCE REMOVED. YOU WILL ONLY WANT TO CUT THROUGH THE ACTUAL VINYL. APPLY TTD EASY MASK TRANSFER TAPE ON TOP OF VINYL DESIGN. SQUEEGEE VINYL REALLY WELL ON THE FRONT AND BACK TO INSURE THAT THE TTD EASY MASK IS SECURELY ATTACHED. REMOVE BACKING AND PLACE DESIGN ON GARMENT PATTERN UP. COVER WITH TEFLON SHEET. TURN IRON ONTO MEDIUM HEAT (POLY SETTING). START WITH 10-15 SECONDS WITH EVEN DOWNWARD PRESSURE AND ADD AN ADDITIONAL 5-10 SECONDS AS NEEDED. IT IS BETTER TO INCREASE TIME AS NEEDED THAN TEMPERATURE. TRY TO AVOID MOVING THE IRON SIDE TO SIDE. WHEN THE PATTERN OF THE FABRIC THREADS CAN BE SEEN THROUGH THE VINYL AND THE EDGES ARE ATTACHED, THE VINYL IS PROPERLY ADHERED. PEEL HOT.

PLEASE NOTE: WHILE AN IRON CAN GET THE JOB DONE, A HEAT PRESS IS THE BEST EQUIPMENT TO APPLY HEAT TRANSFER VINYL.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account