Siser StripFlock PRO
The Only Flock in the Industry That can be Layered on Itself!
A great alternative to embroidery, StripFlock PRO gives logos a raised, textured, suede-like feel. Excellent for retro designs or anytime you want a rich look. Stripflock PRO can be used as a base layer and covered with other materials, giving a very unique, high-end look to logos and designs. In addition, StripFlock PRO is very opaque and has deep, rich colors that are great for animal prints and for layering on top of other materials.
StripFlock Pro is CPSIA Certified so you can decorate kids’ items with confidence.
Cricut®:Blade: Standard Setting: Iron-On
Silhouette Cameo:Blade: Standard, 4 Setting: Heat Transfer Material: Flocked Speed: 5 Thickness: 6
Scan N Cut:Blade: 4 Cut Speed: 1 Cut Pressure: 2
Roland GS/GX-24:Blade: 45° Gram Force: 80-120 Offset: .250 Speed: 30 cm/s
Graphtec:Blade: 45° Gram Force: 10 Tool: CB09U 0 Speed: 30 cm/s
Application instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier hot or cold
Application Instructions (heat press) • Cut in reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 320°F/160°C • Use medium pressure for 15-20 seconds • Peel carrier cold
StripFlock Applies to:
100% cotton Poly/cotton blends 100% polyester Leather
Wait 24 hours before 1st wash Machine wash warm or cold / mild detergent Dry on normal dryer setting Do not dry clean