THE ALL PURPOSE HEAT TRANSFER ADHESIVE!

CONTINUOUS CUTS ARE OFFERED AT THE DISCRETION OF CSDS VINYL. CONTINUOUS CUTS WILL BE OFFERED IN 5, 10, 25 AND 50 YARD INCREMENTS ONLY WHEN AVAILABLE.

CLICK HERE or SCROLL DOWN for a HOW-TO Video with Joe Piazza from Siser NA!

Shining statements, multicolor combinations, and no sew projects can all be achieved with Easyweed Adhesive! Compatible with cost-effective screen printing foils and other materials that lend themselves to adhesion, this adhesive is a money saver and a money maker! Even on its own, Easyweed Adhesive creates a glazed tone on tone appearance that's trending. The milky colord adhesive features a pressure sensitive carrier and low application temperature that's gentle enough for almost all heat sensitive fabrics. Cutting Easyweed Adhesive is like any other Easyweed product with the shiny carrier side face down and image mirrored. For best visibility while weeding, we suggest placing the adhesive on a dark surface.

EasyWeed Adhesive is 75 Microns / 2.95 Mils and is a PET Composition.

CPSIA Certified so it's perfect for decorating children's clothing and accessories.

Please allow for + /- 1/4" clearance in sizing due to manufacturer and human error.

EasyWeed Applies To:

Cricut®:
Blade: Standard
Setting: Iron-on

Silhouette Cameo:
Blade: Standard, 3
Setting: Heat Transfer Material (smooth)
Speed: 8
Thickness: 6

Scan N Cut:
Blade: 2
Cut Speed: 1
Cut Pressure: 1

Roland GS/GX-24:
Blade: 45° Gram
Force: 80-90
Offset: .250
Speed: 25-50 cm/s

Graphtec:
Blade: 45°
Gram Force: 8-9
Tool: CB09U 0
Speed: 30 cm/s

Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
• Peel carrier hot or cold

Application Instructions (heat press)
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold