Siser Metal Heat Transfer Vinyl
Metallic Style Without the Weight!
Dazzle customers with this precious metal HTV! Metal HTV features a smooth finish, soft hand, and a brushed metal appearance that can be washed and worn without becoming lackluster. Unlike other metallic heat transfers, Metal HTV is super light-weight so you can wear it on almost anything. This fashion forward material is ideal for bridal parties, spirit wear, cheer, dance, and any occasion that needs a gleaming touch! Use in conjunction with other materials such as EasyWeed or StripFlock for awesome designs that hit on multiple levels!.
Metal is 100 Microns / 3.9 Mils and is a PET composition.
EasyWeed Applies To:
Cricut®:
Blade: Standard
Setting: Iron On
Blade: Standard
Setting: Iron On
Silhouette Cameo:
Blade: Standard, 2
Setting: Heat Transfer Material (smooth)
Speed: 8
Thickness: 4
Blade: Standard, 2
Setting: Heat Transfer Material (smooth)
Speed: 8
Thickness: 4
Scan N Cut:
Blade: 2
Cut Speed: 1
Cut Pressure: 3
Blade: 2
Cut Speed: 1
Cut Pressure: 3
Roland GS/GX-24:
Blade: 45° Gram
Force: 80-90
Offset: .250
Speed: 30-50 cm/s
Blade: 45° Gram
Force: 80-90
Offset: .250
Speed: 30-50 cm/s
Graphtec:
Blade: 45°
Gram Force: 8-9
Tool: CB09U 0
Speed: 30 cm/s
Blade: 45°
Gram Force: 8-9
Tool: CB09U 0
Speed: 30 cm/s
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
• Peel carrier cold
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
• Peel carrier cold
Application Instructions (heat press)
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier cold
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier cold
