Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
Siser Holographic Heat Transfer Vinyl
A new dimension in heat transfer vinyl!
Holographic contains color changing chips that create the effect of depth and dimension. Available in several special effect colors and finishes, Holographic will take your designs to a new level. Love the look of rhinestones but don’t want to go through all the hassle? Holographic can be cut to look exactly like rhinestones, without having to go through all the extra work associated with applying rhinestone designs. The Holographic line also features a translucent color: Rainbow Pearl. Rainbow Pearl is unlike any other material, giving your designs an opalescent finish that changes depending on the color of the garment. Holographic can be cut with laser systems.
Holographic is 110 Microns / 4.3 Mils and is a Polyester composition.
EasyWeed Applies To:
Cricut®:
Blade: Standard
Setting: Light Cardstock
Blade: Standard
Setting: Light Cardstock
Silhouette Cameo:
Blade: Standard, 3
Setting: Heat Transfer Material (smooth)
Speed: 8
Thickness: 14
Blade: Standard, 3
Setting: Heat Transfer Material (smooth)
Speed: 8
Thickness: 14
Scan N Cut:
Blade: 2
Cut Speed: 1
Cut Pressure: 3
Blade: 2
Cut Speed: 1
Cut Pressure: 3
Roland GS/GX-24:
Blade: 45° Gram
Force: 180-190
Offset: .250
Speed: 30 cm/s
Blade: 45° Gram
Force: 180-190
Offset: .250
Speed: 30 cm/s
Graphtec:
Blade: 45°
Gram Force: 17
Tool: CB09U 0
Speed: 30 cm/s
Blade: 45°
Gram Force: 17
Tool: CB09U 0
Speed: 30 cm/s
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
• Peel carrier hot or cold
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier warm
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier warm
Invalid password
Enter